RZR

Treal Performance has added a new exhaust system to our Treal Performance Product line. This time its for 2016-2019 Polaris RZR XP Turbo. We have made a beautiful “Slip-On Muffler” exhaust system. Full Stainless Steel unit that is 100% TIG welded together. This system bolts onto the stock front exhaust section and instantly expands out to 3 inch, flowing through mandrel bends and a big free flowing straight through muffler to give maximum power gains but yet not be too loud. Our Treal Performance “Slip-On Muffler” sounds as good as it looks, giving a deep rumble but not leave your ears ringing at the end of the day.

Does Not Fit ProXP

Features

• 100% Stainless Steel Crafted Unit

• Up to 8+ Wheel Horse Power Gains

• High End Quality

• 100% Tig Welded

• Built In House In The USA

• Food Grade Stainless Steel

• Micro Brushed Finish

• Light Weight Design

• 6lbs Lighter Than Stock Muffler

• 5 Year Limited Warranty

• Great Sound, Deep Rumble

• Work with Factory Rear Bumper Cover

Product Description

Product Description

Polaris RZR Through Axle Wheel Bearing Grease Tool

This tool is designed to add the ability to grease your wheel bearings without requiring removal of the axles and or entire hub assembly.

Our tools are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.

Polaris RZR Bearing Grease Tool

This tool is designed to add the ability to grease your wheel bearings without requiring removal of the axles and or entire hub assembly.

Our tools are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.

If you have owned your RZR or other UTV you have probably learned of the importance in keeping your wheel bearings in perfect operating condition. With our tool you will relieve the strain of that time consuming task.

Polaris UTV bearings are known to contain little grease right off the shelf, so it is advised to grease your bearings now, new or old. A simple job will go a long way towards preserving the overall mechanical condition of your investment.

With the OEM bearing tool it is required to remove the axle atleast, and in most cases the entire hub it's self, adding hours to your maintenance time. With our tool all tbat is required is removing your wheel, brake caliper, and spindle providing wide open acces to the bearing. Then simply slide our tool in and use your grease gun to lubricate your bearings. Our tool has many benefits.

-Decrease maintanence time
-Decrease operating costs
-Decrease material waste from conventional greasing methods
-Increase Reliability of your UTV
-Low Cost
-Designed and produced in the U.S.A
-Precision machined with the highest quality equipment from 6061 solid Aluminum bars giving you a quality piece that will last as long as your newly greased bearings

If you are wondering if you really do need our tool. Consider this, the cost of one bearing alone will cost $22-$40 depending on brand, shipping, taxes, availability etc. Add in the time it will take you to replace them OR the added cost the have your dealer or shop do it for you. For the cost of one bearing replacement alone you are over half way to purchasing a tool that will simplify life for you.

Our tool features a benefits over the competition by being design with a double o ring seal to make sure the bearing is greased completely. The more grease inside the better!

Do yourself a favor cut down on down time an increase time on the trail! Order our tool today

Our tool fits all 44MM split bearings found in the following models.

Please be advised, that though we strive to make our tool as simple to use as possible, that differences in end user tools may require additional work. It has come to our attention that certain grease gun ends may require you to remove the two radius arm bolts and sliding the axle inwards slightly to allow room for your end to snap on. If you have any questions with these please contact us.

Although we have put effort into compiling this list. Please verify fitment before ordering.

Front

Ranger 500 EFI : 2010
Ranger 570 Full Size : 2015+
Ranger 570 Crew Full Size : 2015+
Ranger 800 EFI : 2010-2014
Ranger 800 Crew : 2010-2014
Ranger 800 6x6 : 2011+
Ranger 900 XP : 2013+
Ranger 900 Crew : 2015+
Ranger 900 Diesel : 2012-2014
Ranger 900 Crew Diesel : 2011-2014
Ranger XP 1000 : 2017
RZR 570 : 2012-2015
RZR S 800** : 2009-2014 (with hub conversion)
RZR 800** : 2008-2014 (with hub conversion)
RZR 4 800 : 2010-2014
RZR 900 : 2011+
RZR 4 900 : 2011+
RZR S 900 : 2015+

RZR 900 XP : 2011+
RZR 1000 : 2014+
RZR S 1000 : 2016+
RZR XP Turbo : 2016+
RZR 4 1000 : 2014+ : 2014+
Scrambler 850 : 2014-2015
Scrambler 1000 : 2014+
Sportsman 550/Touring/X2 : 2010-2014
Sportsman 850/Touring/X2 : 2012+
Sportsman 1000/Touring/X2 : 2015+

Rear

Forest 850 EU : 2015
Forest 1000 EU : 2015
General : 2016+
RZR 900 : 2011+
RZR 4 900 : 2012+
RZR S 900 : 2015+
RZR 900 XP : 2011+
RZR 1000 : 2014+
RZR S 1000 : 2016+
RZR 1000 Turbo : 2016+
RZR 4 1000 : 2014+
Scrambler 850 : 2014-2015
Scrambler 1000 : 2014+
Sportsman 550/Touring/X2 : 2010-2014
Sportsman 850/Touring/X2 : 2012+
Sportsman 1000/Touring/X2 : 2015+

We have had questions regarding the hub conversions on the 800 RZR models. The answer is yes it will work even if you have not had the hub conversions. The conversion was a Polaris upgrade for the 09 and early 10 model years. Then became standard equipment. It was first believed by many 800 RZR owners that the upgraded part was completely different. However, the bearings are all the same between all models. The difference is the later model and early model upgrade kits, hubs were stronger and thus had a different design. So to answer people questions we made sure to note that this tool DOES in fact fit all front 800 bearings in all models.

Warranty exclusively applies to workmanship and manufacturing defects upon receiving your tool.

Warranty will not be given due to misuse or negligence while using your grease tool.

Any damages during shipping are to be reported within 24 hours of receiving your tool. Damages should be reported along with photos of any related articles (boxes, envelopes, packing materials or other evidence to further support damage in transit)

Only one tool included. Pictures are for representation purposes only.

RS1 Sport cage (shown with optional intake kit #710905)

NOTE: Stock air intake cage mounted tubes WILL NOT work with our cage. You can choose our optional intake kit or fabricate your own.

Our RS1 sport cage is designed with strength, safety and style built in! For the ultimate in great looks, Pair your RS1 Sport Cage with the recommended but optional intake kit and Carbon Fiber door skins. Our RS1 Sport cage is built using .095 DOM steel tube and can be ordered RAW or Powder Coated in standard or custom colors. You can also choose the optional tabs for a 20” light bar (most popular 20 inch LED lights will work, call to confirm off brands). The RS1 cage also comes with an aluminum roof and dual whip tabs.
Lead times can vary but are generally 1-4 weeks, please call or email for exact lead times.

All SDR standard cages are jig built in house to exacting tolerances and are fully welded by our professional staff.

About Our Sport Cages

If you would like to learn more about what makes our Sport Cages stand above the rest, please visit our Sport Cages page.

Oversize Shipping

At SDR Motorsports Inc we ship cages and complete packages every day to places all over the world. We can ship your cage raw or powdercoated and ready to install. We take time to wrap every cage To protect it from shipping damage and offer affordable insurance for every shipment in case damage does occur. Freight costs are constantly changing up and down so once you place your order we will contact you with Exact costs and shipping options. Charges range from as low as $150.00 to most west coast states and around $300.00 to most eastern states. Residential delivery charges and extra fees may apply to more rural locations Will call pick-up from your local terminal can also be arranged to avoid extra charges.

Take your UTV side by side to the next level with our Baja Designs UTV vehicle specific mounting kits. This kit comes equipped with a pair of Squadron Pro LED lights that will truly light up the night at 9,800 lumens at 80 watts. Whether you’re looking for more trail coverage or just need more light for outdoor working conditions, these Squadron Pro LED lights have you covered.

Includes:

• (2) Squadron® Pro LED Lights
• Mounts Specified to Selection
• Wiring Harness

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (10°) and Spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

The XL Laser light is the World's first laser auxiliary light and has redefined the future of forward projection lighting. Capable of throwing light an astonishing 350% farther than our current XL Racer Edition, the XL Laser is the most effective distance light available today. Projecting four laser chips through our proprietary High Speed Spot optic, this light produces an extremely tight 1.5° pattern, and distance that is untouchable by any LED or HID platform. If your truck, jeep, or UTV requires the ultimate in distance lighting look no further than the XL Laser.

Specifications:

Lumens: 2,000 Utilizing 4 Laser Chips
Wattage/Amps: 60w
Dimensions: 4.43" x 3.65" x 4.43"
Weight: 2.45 lbs
Laser Chip Life Expectancy: 2000
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Exceeds MIL-STD810G (Mil-Spec Testing)
Built-In Overvoltage Protection
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

940nm Option:

Go secretly into the night and see without being seen with our S2 Pro IR LED Light. Its high-output 940 nanometer infrared LEDs combined with its compact 3” x 2” size makes it the ultimate covert IR on the market today.

Includes:

• S2 Pro, IR LED Light
• Mounting Bracket

850nm Option:

Although compact at 3” by 2”, don’t be fooled by its size, the S2 Pro IR 850nm LED light is more powerful than most larger lights on the market today. The S2 Pro IR 850nm LED light is different from other 850nm lights due to the fact that we offer a high/low capability for the S2 Pro IR. This feature allows the lights already low visible signature to be reduced even further in low mode and provides clearer visibility in the field for far distances while driving at high speeds in high mode.

Includes:

• S2 Pro, 850nm IR LED Light
• Mounting Bracket

This Universal mount allows you to mount an OnX6 20" or S8 20" on your vehicle with little to no difficulty. There are two adjustable mounting positions along with one solid mount position in the center, giving you ease of installation to your specific application.

Includes:

• x1 20" Universal, OnX6/S8 20" U-Cradle Mount Kit

Pro & Sport 3-pin, Hi-beam Harness-2 light max 150 watts

This universal 12v wiring harness is capable of powering up to 12 amps and has been specifically designed for our 3 pin lights, this includes OnX6, S8, and XL Series lights

It includes a tap in for your Hi-Beams to provide power to the lights. This harness comes ready to power up to two (2) Baja Designs LED lights listed above.

Applicable to the following products:

• OnX6 Series
• S8 Series
• XL Series

(NOTE THIS HARNESS CAN ONLY HANDLE 150WATTS)

Pro & Sport 2-pin, Hi-beam Harness-2 light max 150 watts

This universal 12v wiring harness is capable of powering up to 12 amps and has been specifically designed for our 2 pin lights, this includes Squadron Racers, Squadron Pros, Squadron Sports, S2 Racer, S2 Pros, fuegos, PreRunners, and LaPaz lights.

It includes a tap in for your Hi-Beams to provide power to the lights. This harness comes ready to power up to two (2) Baja Designs LED/HID lights listed above.

Applicable to the following products:

• Squadron Series
• S2 Series
• Fuegos
• PreRunners
• LaPaz

Pro & Sport 2-pin, 10' Extension

This ten foot extension will allow you to extend one two pin wiring lead to one Baja Designs two pin light.

Compatible Products:

• Squadron/S2 product line
• 2-Pin Wiring Harnesses

This harness allows you to utilize the built-in dimming feature found on XL Pro and XL80 LED Motorcycle Lights. This includes one bullet connector that goes directly to your XL Motorcycle Light and a ring terminal that goes to a frame/chassis ground.

This switch will easily dim the light from full brightness to 20% output. Please keep in mind our lights are not DOT approved or street legal. It is up to rider discretion if being used on the street.

The Baja Designs XL Pro/XL80 Mode Harness contains:

· Push Button Switch

· Wiring Harness with Plug and Play connector

Applicable to the following products:

• XL Pro
• XL80

Conveniently set the brightness of your Squadron Dual Sport Kit to match riding conditions. Often auxiliary lights are too bright or have too wide a lighting pattern to operate at full power during the day or under certain road conditions.

This rock guard/light cover fits the Squadron-R Pro & Squadron-R Sport. It is designed for daytime use, to protect from harsh terrain that may throw dirt, dust and rocks at your Squadron-R LED lights. If you are looking for extra protection from your riding environments and a cool cover, then the Squadron-R rock guard is your answer!

This rock guard/light cover fits the Squadron Pro & Squadron Sport. It is designed for daytime use, to protect from harsh terrain that may throw dirt, dust and rocks at your Squadron LED lights.If you are looking for extra protection from your riding environments and a cool cover, then the Squadron rock guard is your answer!

This rock guard/light cover fits the XL-R 80, XL-R Racer, XL-R Pro & XL-R Sport. It is designed for daytime use, to protect from harsh terrain that may throw dirt, dust and rocks at your XL-R LED lights. If you are looking for extra protection from your riding environments and a cool cover, then the XL-R rock guard is your answer!

Our engineers came up with a quick, sturdy, and low profile design to mount lights on the cage of your RZR 1000. You will be able to mount these with ease, and have a range of Baja Designs auxiliary lighting to choose from.

Applicable Product

• S2 Series
• Squadron Series
• XL Series

Includes

• Brackets

Now you can have the best of both worlds with the OnX6™ Dual Control LED Light Bar. With the addition of another power cord and switch, you have the ability to control the inner and outer sections individually. This configuration provides a versatile package by allowing you to have one light bar with both amber and white light. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

This bar is equipped with BMT – Battery Management Technology

-Elimination Of Flickering at Low Voltage

-Added Protection to Vehicle Wiring and Systems

-Protection from Dangerous Current Spikes

The OnX6+ LED Light Bar is BRIGHTER. BOLDER. BETTER.

Includes:

• OnX6™ 30” Dual Control LED Light Bar
• Mounting Brackets
• Hi-Low Dongle

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (42°) and the spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Driving: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2) (Also available in amber)

High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

The OEM, Polaris RZR OnX6 Roof Mount Kit has been designed specifically for the Polaris RZR XP900 (2015-ON) & Polaris RZR XP1000 (2014-O quick and easy installation. The OnX6 LED light bar utilizes our trademarked High Speed Spot™ reflector, the same one used by our Team BD racers, to give you the guaranteed furthest projecting LED Light Bar on the planet. At an impressive 19,350 lumens, the OnX6 is BRIGHTER. BOLDER. BETTER. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

Application: Polaris RZR XP900 (2015-ON) & Polaris RZR XP1000 (2014-ON).

Includes:

• OnX6 30” LED Light Bar – Driving/Combo
• Vehicle Specific Wiring Harness

Patterns:


Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (42°) and the spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

The RTL-M (Rear Tail Light – Mini) is a miniature version of Baja Designs’ existing RTL. At a compact 6-inches, this light bar is exceptionally useful on vehicles where space is limited, such as: Jeeps, motorcycles, UTVs, and ATVs.

The RTL-M includes five red LEDs which function as the running and brake lights. The high visibility of these LEDs provides extra safety to any off-road enthusiast, from the casual weekend warrior, to the dedicated racer. The bar also features a pair of central white LEDs which act as cargo and scene lighting. Perfect for grabbing gear out of the toolbox or lighting the camp area. The RTL-M also features an optional license plate illuminator for those that would like to use the product with our Universal License Plate Mount or Jeep JK Spare Tire Mount.

Includes:

• RTL-M, 6" Light Bar No Plate Light
• Mounting Hardware

Mounting:

The RTL, RTL-G and RTL-B come with an integrated track system that allows you to adjust within the 30" width of the bar. The provided hex head 1/4 20 hardware slides in the ends of the of the bars and can be adjusted to suit your needs.

Looking for more safety out on the trail? Baja Designs' RTL is your answer. This light features a running light, brake light, amber dust light, and white light and is a must for all enthusiasts looking for extra safety.

• Running Light
• Brake Light
• White Light
• Amber

Includes:

• RTL, 30" Light Bar
• Mounting Hardware

RTL-S

The RTL-S comes with integrated flashing amber turn signals for higher visibility and performance off-road. Also featuring a running light, brake light, and white work/cargo light, this bar is a must for all enthusiasts looking for extra safety.

• Flashing Amber Turn Signals
• Running Light
• Brake Light
• White Light

Includes:

• RTL-S, 30" Light Bar
• Mounting Hardware

RTL-G

Looking for more safety out on the race course? Baja Designs' RTL-G is your answer. This light features race legal rear taillight specifications and is a must for all drivers looking for that reassurance of being seen when leading the pack.

Lighting Features:

• Running Light
• Brake Light
• Green Safety Light (Designated for slow moving)
• Flashing Amber

Specifications:
Wattage/Amps:
Running Light with Flashing Amber and Solid Amber: 10W
Brake Light w/Flashing Amber and Solid Amber:28W
Green Safety Marker: 19W
Dimensions: 32.125" x 2.15" x 1.5"
Weight: 3.75 lbs
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Hardware & Bracket Material: Stainless Steel
Exceeds MIL-STD810G (Mil-Spec Testing)
Built-In Overvoltage Protection
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

(RTL Patent D802,187)

Includes:

• RTL-G, 30" Light Bar
• Mounting Hardware

RTL-B

Looking for more safety out on the race course? Baja Designs' RTL-B is your answer. This light features race legal rear taillight specifications and is a must for all drivers looking for that reassurance of being seen when leading the pack.

Lighting Features:

• Running Light
• Brake Light
• Blue Safety Light (Designated for slow moving)
• Flashing Amber

Baja Design Features:

Satisfactions Guarantee – 30 Day Money Back
Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
MoistureBlock™ – Waterproof, Rain Proof, Submersible
CopperDrive® – Only LED Driven At 100%

Specifications:

Wattage/Amps:
Running Light with Flashing Amber and Solid Amber: 10W
Brake Light w/Flashing Amber and Solid Amber:28W
Blue Safety Marker: 19W
Dimensions: 32.125" x 2.15" x 1.5"
Weight: 3.75 lbs
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Hardware & Bracket Material: Stainless Steel
Exceeds MIL-STD810G (Mil-Spec Testing)
Built-In Overvoltage Protection
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

(RTL Patent D802,187)

Includes:

• RTL-B, 30" Light Bar
• Mounting Hardware

This harness takes all the guess work out of installation and is incredibly high quality suited for race use!

Put your dimmer/backlit mode to use!

This harness allows you to use the high beam or toggle switch to turn on the light bars.

Features:

• Includes On/Off Toggle switch for primary light bar function, as well as a separate On/Off switch for secondary (Amber Backlight/ Laser) function.
• Heavy duty wire gauge that can handle any size bar
• Complete with battery ring terminals, relay, sheathing, fuse
• 100" wire length between battery ring terminals and weatherpack for bumper or roof mounting

The S8 Rock Guards are designed for day or nighttime use. We have three color options to suit all your needs - whether you need a black light cover to comply with local laws, want to use the amber guard to quickly switch between white and amber light, or the clear rock guard for additional protection from sand blasting and rogue rocks.

Set your Polaris RZR apart from the rest with our OEM Polaris RZR grille kit. This kit comes equipped with our powder coated grille mount, a 10” OnX6 LED light bar and wiring harness. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

Application: Polaris RZR XP900 (2015-16) & Polaris RZR XP1000 (2014-16).

Includes:

• OnX6 10” LED Light Bar – Driving Combo
• BD Custom Grille
• Wiring Harness

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (42°) and the spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

The Polaris RZR Mount Kit has been manufactured specifically for the Polaris RZR. The A-Pillar mount gives you the option to mount either a 30 inch OnX6 LED Light Bar or a 30 inch S8 LED Light Bar, providing you with a clean OEM appearance.

Compatible Models:

• Polaris RZR 800/900 (2009-2014)
• Polaris RZR XP1000 (2014-On)

Note: OnX6 and S8 LED Light Bars sold separately

Includes:

• (2) LED Billet Mounts (1.75 Back Strap)
• (2) LED RZR Billet Clamp B
• (2) LED RZR Bracket C
• Hardware

Our 2” harnesses are the absolute safest belts for your UTV, SXS, or any vehicle. With sewn in shoulder pads the comfort is always there. Great for kids or trail riding! For serious riding see our 3” 5 Point Harnesses. Can be used without the crotch strap if preferred.

Separate yourself from the pack with the Baja Designs Polaris RZR XP1000/RS1 "Unlimited" Headlight Kit (2014 - Current). This kit utilizes two Squadron Pros (4,900 lumens each) and two Squadron Racers (4,300 lumens each). The need for front bumper lighting or roof mounted light bars are a thing of the past. This plug and play mounting kit includes two vehicle specific mounting brackets and a wiring harness, allowing you to use your factory switch and mounting hardware.

Included:

- (2) Vehicle Specific Mounting Brackets

- (2) Plug & Play Adapters

- All Necessary Hardware

- (2) Squadron Pro Combo

- (2) Squadron Racer Edition Spot

Wondering what lighting configuration is best for you? Checkout the breakdown below showcasing multiple performance tiers.

Sportsmen:
(2) Squadron Sport Combo
(2) Squadron Sport Spot
Pro:
(2) Squadron Pro Combo
(2) Squadron Pro Spot
Unlimited:
(2) Squadron Pro Combo
(2) Squadron Racer Edition Spot

Application:

• RZR XP 1000 2014-Current
• RZR RS1 18-Current
• RZR 1000 Turbo-S 18-Current

Complete harness for Baja Designs XL (Pro & Sport) LED Light.

This harness takes all the guess work out of installation and is incredibly high quality suited for race use!

This harness allows you to use the high beam or toggle switch to turn on the LED light.

Features:

• Includes Toggle switch for On/Off and Momentary button for dim mode.
• Heavy duty wire gauge.
• Complete with battery ring terminals, relay, sheathing, fuse.
• 100" wire length between battery ring terminals and weatherpack for bumper or roof mounting.

Includes:

• (1) XL (Pro & Sport) Wire Harness w/Mode-2 lights max 325 watts (64-0119)
• (1) OnX6/XL (Pro & Sport) Wiring Harness Splitter - adds 1 light (61-3608)